The typical Large Vessel Cutter is easily installed on vessels with oil seal bearings. The cutting blades are made of stainless steel, which is hardened to approximately 43-45 Rockwell C. This hardening characteristic ensures the greatest cutting ability and is the hardest metal known to remain stable under salt water. The remainder of the cutter parts are 316L stainless; this metal is suitable where hardness is not required for performance, but it is also very stable in salt water. The box welded into the rope guard is also made from stainless steel. The compatibility of the metals allows the stainless steel box to be easily welded into rope guard.

The typical Medium Vessel Cutter is designed to fit all vessels with propeller hub diameters 9" - 40"; the stationary cutter assembly can be mounted directly onto a strut or into a rope guard. The cutter installation is very versatile and can be adapted to almost any application.

Typical Large Vessel Cutter Model 60/48 Range from 48"-72" inches (1200MM to 1800MM) Propeller Hub Diameter

Typical Medium Vessel Cutter - Model Range from 9" - 48" (230MM to 1200MM) Propeller Hub Diameter