The photo below shows a
Line Cutter Model
LV-60/48 complete and mounted to the propeller hub. The rotary cutter
assembly is mounted onto the propeller hub (which was previously
drilled and tapped) and fastened with stainless screws. The stationary
cutter assembly is married to the rotary cutter assembly with two
shoulder bolts and .015 shim spacers between the rotary and stationary
cutting blade.
The photo also shows the grinding and preparing of the strut recess in
preparation for the rope guard installation. We recommend a 3/4" rope
guard to be installed when a line cutter is used. The 3/4" rope guard
provides the strength to hold during instances of severe resistance
such as cutting a large hawser or heavy nets.
Spurs Large Vessel Line Cutter
mounted on Prop Face
Line Cutter Model
LV-60/48 complete and mounted to the propeller hub. The rotary cutter
assembly is mounted onto the propeller hub (which was previously
drilled and tapped) and fastened with stainless screws. The stationary
cutter assembly is married to the rotary cutter assembly with two
shoulder bolts and .015 shim spacers between the rotary and stationary
cutting blade. 