Home Shaft Cutter Ship Cutter Tef-Gel Spacer Shaft Seals Dealer Locator Boat Shows Contact Us

 

thrust_title.jpg (14485 bytes)

Propeller Mounted
What Are Spurs?
Typical Installation
Oil Leak Responsibility
Propeller Mounted
Thrusters and Pods
How Spurs Work?
Installation
typical cutter models
How to Install?
Installation Drawings
How To Order
Interactive Assembly

Thrusters, Z-Drives and other propulsion components need the protection of  smbluelo.gif (2351 bytes).

The most common repair on thrusters
is seal damage and gear replacement. This is caused by excessive wear due to water intrusion. Guard against damaging thrusters oil seals by installing smbluelo.gif (2351 bytes)Cutter Systems.

thrust_rotary.jpg (19550 bytes)

 

 

Final test after installation on main thrusters.

thrust_stationary.jpg (16688 bytes)

thrust_unit.jpg (22158 bytes)

Fishing net damages the seals and emergency dry dock is required without Spurs Cutters

Spurs Marine Logo Marine Manufacturing Inc.
201 SW 33rd Street Ft. Lauderdale, FL 33315 USA
spurs cutters are protected by USA and International patents
 
 Spurs Marine Logo logo is a trademark of Spurs Marine Manufacturing Inc
Copyright ® All rights reserved.

 

Hit Counter