|
| |
Line Cutters (Shaft Mounted)
for shaft sizes 3/4" to 6 1/2"
WOW!
What Protection!!! |
A.B.S. Approved!
Install At Next Haul-Out!
For Safety and Peace of Mind! |
AVOID
THIS! |
 |
 |
 |
 |
| INSTALLED
ON: USCG, US Navy, Canadian CG,RNLI (English CG) and thousands
of pleasure and commercial vessels worldwide. |
How  Line, Net & Weed Cutter works and why you should
install at your next haul-out...
 The principle
that enables the shaft mounted "SPURS" to cut
so effectively is the "screw action" created as
the propeller turns, winding lines, nets or weeds
directly into "SPURS" blades, for an instant
cut eliminating entanglement or damage to the running
gear.
A POSITIVE SOLUTION TO AN AGE OLD PROBLEM.
Eliminates dives to cut prop-fouling lines in
freezing or high seas.
No more costly commercial "Down Time" for
repairs.
Prevents the need for Coast Guard towing or expensive
commercial towing.
No more shafts or struts torn loose that can sink your
vessel.
Avoid expensive haul-outs, dry-docking and diver's
charges.
Prevents burnt bearings and engine overload repairs.
 |
 |
| Cuts line
with each revolution (forward or reverse), with no loss
of speed or efficiency. |
"SPURS"
are made of hardened stainless steel. Don't leave the
dock without "SPURS" protection! |
Fits shaft sizes ¾" to
6½".
(Metric sizes 20mm-175mm). |
| Line
Cutters Prop Mounted | Spacers | Home | PSS Shaft Seal
| Tef-Gel | Dealer Locator
|
Copyright ® All rights reserved.
web site maintained by www.alpinecommerce.com
|
