|
Installation Procedure
Line Cutters (Shaft Mounted)...for shaft sizes from 3/4"
to 6 1/2"
SPURS Line Cutter Systems for shaft sizes 3/4" sizes to
6 1/2" work best and will last longer when properly installed. Please
read all of the installation procedures
carefully before proceeding with the installation of your cutter system.
Call or email us if you have any questions regarding any of these steps.
For complete installation procedure, click on pages...
          
SIZING SHEET FOR SPURS SHAFT MOUNTED MODELS
|
MODEL
TYPE |
SHAFT
DIAMETER |
CUTTER HUB
DIAMETER |
CUTTER OVERALL LENGTH |
CUTTER
WIDTH |
MINIMUM SPACE TO INSTALL CUTTERS |
|
A |
3/4", 7/8", 1", 1-1/4"
20, 22, 25, 30mm |
2 "
51mm |
4"
102mm |
15/16"
24mm |
1-1/8
30mm |
|
B |
3/4", 1", 1-1/8",1-1/4", 1-3/8",
1-1/2"
25, 30, 35, 40mm |
2-5/8"
67mm |
5"
123mm |
1-1/16
27mm |
1-1/4
32mm |
|
C |
1-1/2", 1-5/8",
1-3/4", 1-7/8", 2"
40, 45, 50mm |
3-3/8"
86mm |
6"
152mm |
1-3/8"
35mm |
1-9/16"
39mm |
|
D |
1-1/2", 1-3/4", 2", 2-1/4", 2-1/2" 40 to 60mm |
3-7/8" 98mm |
6-3/4" 171mm |
1-7/16" 36mm |
1-5/8" 41mm |
|
E |
2", 2-1/4", 2-1/2", 2-3/4", 3" 50 to 75mm |
4-3/8" 110mm |
7-5/8"
194mm |
1-1/2" 37mm |
1-11/16" 43mm |
|
F |
2", 2-1/4", 2-1/2", 2-3/4", 3", 3-1/2"
60 to 90mm |
5-1/2" 140mm |
10"
254mm |
1-9/16" 40mm |
1-3/4"
45mm |
|
F1 |
3", 3-1/2", 4", 4-1/2" 75 to 115mm |
6-1/2"
165mm |
11" 280mm |
1-11/16" 43mm |
1-7/8" 48mm |
|
F2 |
3", 3-1/2", 4", 4-1/2", 5", 5-1/2" 75 to 140mm |
7-7/8" 200mm |
13-1/2" 343mm |
1-11/16" 43mm |
1-7/8" 48mm |
|
F3 |
4", 4-1/2", 5", 5-1/2", 6", 6-1/2" 100 to 175mm |
9-1/2"
241mm |
15-3/4" 400mm |
1-7/8" 48mm |
2-1/8" 54mm |
Notes:
Metric dimension are in 5mm increments
Custom cutters can be bored to any size between posted sizes
 Marine Manufacturing
Inc.
201
SW 33rd Street Ft. Lauderdale, FL 33315 USA
E-mail: spurs@spursmarine.com
phone: (954) 463-2707
Fax: (954) 525-0239
spurs cutters are protected by USA and International patents
logo is a trademark of Spurs Marine Manufacturing Inc
Copyright ® All rights reserved.
|
